UTILITIES & T&D · FOR SAFETY LEADERS
See Every Hazard, on Every Crew,
Before the Job Starts.
You shouldn't find out about the near miss a week later. Field1st puts a voice-first tailboard in every crew's hands and the whole field on your dashboard — so you stop chasing incident reports and start preventing the incidents. Because the goal was never a finished form. It was a crew that goes home.
A 20-minute walkthrough built around your tailboards. No slides, no prep.
START WHERE IT HURTS MOST
Six Utility Problems, Solved at the Point of Work.
Every one of these is a place utility safety programs lose data — or lose crews. Here's what Field1st does about each.
01
VOICE1ST
Crews Skip or Back-Fill the Tailboard
Voice1st lets crews speak through the briefing in under 90 seconds, hands-free, gloves on. Completion jumps because it works at the point of work.
02
AI SAFETY AGENT
Near Misses Go Unreported
One-tap near-miss capture with voice narration. The AI Safety Agent follows up with the crew and surfaces patterns before they become incidents.
03
FORM INTELLIGENCE
Field Data Is Too Vague to Act On
AI scores every submission for completeness and specificity, and delivers a micro-learning when a hazard description is too thin for the standard.
04
CORRECTIVE ACTIONS
Corrective Actions Never Close
Automated follow-up, owner assignment, and escalation are built into the workflow — so safety managers get real-time status, not a stale spreadsheet.
05
PULSE1ST ANALYTICS
No Visibility Across Distributed Crews
Real-time leading-indicator dashboards across every circuit, division, crew, and contractor, so you spot hazard trends before they become recordable.
06
ADOPTION BY DESIGN
Adoption Dies After the First Week
Field1st is built for the people doing the work — voice-first, offline-capable, and fast enough that crews use it before the job, not after.
Recognize Your Program in Any of Those?
You don't have to live with paper tailboards and blind spots. See the fix in 20 minutes, built around your crews.
BUILT FOR THE WAY UTILITIES WORK
Tailboards, Permits, and Hazard Checks, Digitized.
Field1st runs the safety workflows T&D and electric utility crews already use — completed by voice and photo, visible to operations in real time.
01
TAILBOARDS & JOB BRIEFINGS
Voice-First, Under 90 Seconds
Crews talk through the tailboard; Voice1st captures crew, scope, hazards, and controls — and dispatch sees it live.
02
SWITCHING & GROUNDING
Prove the Controls
Capture and confirm switching orders, grounding, and isolation steps, with a signed, timestamped record for every job.
03
CONFINED SPACE & EXCAVATION
Permits That Route Themselves
Build dynamic permits for confined-space entry, excavation, and pressure control, with automated approval and escalation.
04
AI HAZARD RECOGNITION
See What the Crew Might Miss
A photo flags missing grounding, PPE gaps, vegetation encroachment, or unsafe line proximity — then recommends the control.
05
ENERGIZED LINE HAZARDS
Built for the Line
An agent for the hazards specific to energized overhead lines — minimum approach distance, cover-up, grounding, and clearances. (Coming soon.)
06
WEATHER & FIRE WIDGET
Risk Context in the Flow
Crews see real-time local weather and fire conditions right in the briefing, so wildfire-ignition and storm risk stays visible.
ALIGNED TO THE STANDARDS YOU REPORT AGAINST
PROVEN AT UTILITIES
The Utilities Betting on Field1st.
American Electric Power (AEP) selected Field1st as their field safety platform — and it shows where it counts most: adoption.
Outcomes reported by Field1st customers. AEP and Dominion Energy relationships confirmed; additional metrics from a major T&D utility deployment.
ADOPTION IN THE FIELD. INSIGHTS IN THE OFFICE.
Operations and Safety Both Win.
01
FOR OPERATIONS
Real-Time Crew Visibility
See which crews are working, where, and against what hazards — so dispatch and ops respond faster and plan the day on live information.
02
FOR SAFETY
Leading Indicators You Can Trust
Because crews actually use it, you get clean data and real leading indicators — hazard trends, near-miss rates, and closeout, not lagging reports.
03
FOR THE CREW
Ready1st Emergency Readiness
A lock-screen widget with the 911 address, GPS, and on-site crew — so responders reach a downed lineworker fast, even with no signal.
FITS YOUR UTILITY STACK
Connects to the Systems You Already Run.
Field1st works offline in the field and connects to the platforms your utility depends on — so safety data doesn't live in a silo.
Integrations
Integrate safety data with your GIS, OMS, SCADA, and EAM systems — or pull it into your own dashboards and BI through an open API. Capture happens offline in the field and syncs automatically when the device is back online.
STORM & MUTUAL AID
Get Every Crew on One Safety Process, Fast.
When mutual-aid and contractor crews surge in for a restoration, you don't have time to license and train everyone. Field1st gets them onto your safety process in minutes.
THE OUTCOME
From Compliance Tracking to
Operational Safety Assurance.
Fewer Serious Incidents
Faster Restorations
Stronger Regulatory Compliance
Less Administrative Overhead
FOR SAFETY LEADERS
The Field Safety Benchmark for Utilities and T&D.
Not ready for a demo? See how top upstream, midstream, and pipeline operators are closing the gap between the plan and the field — adoption rates, near-miss reporting, and the leading indicators that actually predict serious incidents. A five-minute read for safety leaders.
UTILITY QUESTIONS
Frequently Asked Questions.
What Is Utility Safety Software?
Utility safety software helps electric and T&D crews run digital tailboards, job briefings, permits, and hazard checks in the field, often by voice, and gives operations real-time visibility into every crew. Field1st is built for the frontline, so crews actually use it.
How Can Utilities Digitize Tailboards?
Replace paper tailboards with a mobile or voice pre-job briefing that captures the crew, hazards, and controls in under 90 seconds and syncs to a live dashboard, even in areas with no signal.
Does Field1st Align to Utility Standards?
Yes. Hazard recognition and forms align to standards such as OSHA 1910.269, NERC FAC-003, and API RP 1173, and every record is timestamped, signed, and audit-ready.
Does Field1st Support Storm Restoration and Mutual Aid?
Yes. Storm-restoration workflows and QR guest access let mutual-aid and contractor crews complete briefings and hazard assessments without a paid seat, while you keep full visibility into who did what.
Does Field1st Integrate With Utility Systems?
Field1st works offline and can integrate with GIS, OMS, SCADA, and EAM systems, so safety data connects to the platforms utilities already run.
Bring One Tailboard.
We'll Show You the Rest.
A 20-Minute Walkthrough Built Around Your Crews.
Hand us one form your crews use today. In 20 minutes you'll watch it come alive in Field1st — voice capture, AI hazard review, and the real-time dashboard your leadership keeps asking for. No slides. No prep. No commitment.